TEM Controller » History » Version 1
Anchi Cheng, 01/31/2018 11:51 PM
| 1 | 1 | Anchi Cheng | h1. TEM Controller |
|---|---|---|---|
| 2 | |||
| 3 | TEM Control is a remote control of TEM since remote access to the microscope itself is often not available to the end user. Simple operations in this includes some sanity check before they are sent to the scope. |
||
| 4 | |||
| 5 | * Required bindings* |
||
| 6 | |||
| 7 | TEMControllerNodeAlias- (ChangePresetEvent) -> PresetsManagerNode |
||
| 8 | PresetsManagerNode - (PresetChangedEvent) -> TEMControllerNodeAlias |
||
| 9 | |||
| 10 | * Settings* |
||
| 11 | |||
| 12 | None |
||
| 13 | |||
| 14 | *Operation Notes* |
||
| 15 | |||
| 16 | To make the node aware of what instrument it is connected to, send a preset to scope and then click the refresh tool. |