Leginon

h1. Test Leginon with Simulator

h2. Test Leginon with Simulator

TEM and CCD simulators are created automatically on the computer Leginon program started

at. They are convenient as a way to look around the GUI to try out buttons. The images

"acquired" are just random squares on background. Here we will use them to test the database

connection and storage disk mapping.

h2. Start Leginon on the computer you will run most of the process

* Register as a Leginon user and then copy and personalize your configuration file before your first use.

**  First User: Refer to Installation Guide [[Administration Tools|Chapter on Administration Tools]]

**  Later Users: Refer to [[Set up for a new regular user|Set up for a new regular user]] in "Administration Tools" Chapter.

*  start-leginon.py (From any directory for Linux)

OR

from Start Menu: \Start\Programs\Leginon> Leginon (on Windows)

*  Leginon Setup Wizard> select "Create session" in session type if a new session is needed.

**  Fill in session name and comments. Comments will appear in the Web Viewers

**  Select instrument and project, if project database is used. Image path is automatically selected.

**  Image path is automatically selected based on your leginon.cfg file.

*  Leginon Setup Wizard> No need to edit client list as the computer where the program is started is automated added.

*  Choose "Finish" in the set up wizard to start the session.

h2. Acquiring the first simulated image

*  Leginon/Application/Run> select Manual Application.

*  Leginon> From the list of nodes on the left panel, select Manual node.

*  Leginon/Manual> Open the "Setting" tool and configure the settings:

** SimuTEM and SimuCCDCamera should be available for selection.

** Acquisition/Camera Configuration- use one of the preconfigured selection for binning and size such 512x8.

** Save image to the database = yes.

** Leave the rest of the configuration as default.

*  You should see your first simulated image acquired through Leginon in the image display panel.

h2. Check on the Web viewer

Follow the [[Using the Web viewer|instruction in Manual Application Chapter]].

h2. Problem solving for the simulation test

Most problems regarding this test are caused by bad configuration. You should double

check your [[Configure leginon.cfg|leginon.cfg]], [[Configure sinedon.cfg|sinedon.cfg]], [[Web Server Installation|config.php]] as outlined in

complete installation chapter. See [[Test run operation problems|Installation

Troubleshooting]], and "leginon Bulletin Board":http://emg.nysbc.org/bb/viewforum.php?f=2 or  "dbemtool Bulletin Board":http://emg.nysbc.org/bb/viewforum.php?f=6  such as the topic " "information not saved to db":http://emg.nysbc.org/bb/viewtopic.php?t=241 "

for common problems.

If everything goes smoothly, do a test directly on the computer controlling the microscope as in the next section.

______

[[Test Leginon on the Computer Controlling the Microscope|Test Leginon on the Computer Controlling the Microscope >]]

______