The EM node » History » Revision 2
Revision 1 (Amber Herold, 04/23/2010 09:55 AM) → Revision 2/3 (Amber Herold, 04/27/2010 02:34 PM)
h1. The EM node
The EM node or tab is the node that is running on the microscope computer. This node is
responsible for communicating to the microscope, CCD, and Leginon. Without the EM node,
Leginon cannot control the microscope.
Required bindings: None
h2. Microscope paramters
Select TEM to view and sometimes change microscope parameters
* Leginon/EM> Do Pauses
enabled = pause for example 2s before acquiring an image (pauses set in acquisition
nodes)
* Leginon/EM> High Tension
* Leginon/EM> Magnification
* Leginon/EM> Intensity
* Leginon/EM> Spot size
* Leginon/EM> Lenses: Objective excitation
* Leginon/EM> image shift (x, y)
* Leginon/EM> image shift raw (x, y)
* Leginon/EM> beam shift (x, y)
* Leginon/EM> beam tilt (x, y)
* Leginon/EM> objective stigmator (x, y)
* Leginon/EM> diffraction stigmator (x, y)
* Leginon/EM> condensor stigmator (x, y)
* Leginon/EM> focus (absolute focus value)
* Leginon/EM> defocus (relative focus value)
* Leginon/EM> reset defocus (enabling resets the defocus)
* Leginon/EM> Vacuum Status
* Leginon/EM> Column pressure (in Pa)
* Leginon/EM> Column valves ("open" or "closed")
* Leginon/EM> Turbo pump ("on" or "off")
* Leginon/EM> Stage Status ("busy, ready, or unknown", cannot manually
adjust)
* Leginon/EM> Correct stage movement (enabled)
* Leginon/EM> Stage Position x/y/z
* Leginon/EM> Angle a/b
* Leginon/EM> Film Stock
* Leginon/EM> Film Exposure number (of the next exposure)
* Leginon/EM> Film Exposure type ("manual")
* Leginon/EM> Automatic exposure time (s, based on intensity)
* Leginon/EM> Manual exposure time
* Leginon/EM> User code (that will appear on the next film exposure)
* Leginon/EM> Date Type (YY.MM.DD)
* Leginon/EM> Text (additional text to apply to the next film exposure)
* Leginon/EM> Shutter (pre-specimen, "open" or "closed")
* Leginon/EM> External shutter (post specimen shutter connection, "connected" or
"disconnected")
* Leginon/EM> Screen Current (mA)
* Leginon/EM> Screen Position (Main and Small) ("up" or "down")
* Leginon/EM> Holder Status ("inserted" or "not inserted")
* Leginon/EM> Holder Type (options "single tilt, no holder, cryo, unknown
holder")
* Leginon/EM> Lose Dose Status ("on" or "off", default is "off"*)
* Leginon/EM> Low Dose Mode ("exposure*, focus, or search")
* Leginon/EM> film stock
h2. Camera parameters
The current camera parameters are displayed in Leginon/EM>
Information:
* Leginon/EM> binning (x, y)
* Leginon/EM> Size (x,y)
* Leginon/EM> Pixel size (x,y)
* Leginon/EM> Name
* Leginon/EM> Chip
* Leginon/EM> Serial number
* Leginon/EM> Maximum value
* Leginon/EM> Live mode
* Leginon/EM> Simulation image path
* Leginon/EM> Temperature
* Leginon/EM> Harware gain index
* Leginon/EM> Hardware speed index
* Leginon/EM> Retractable
* Leginon/EM> Axis
Settings:
* Leginon/EM> Dimension (x, y)
* Leginon/EM> Offset (x,y) (from the top left corner of the CCD)
* Leginon/EM> Binning (x,y)
* Leginon/EM> Pre-configured camera settings
* Leginon/EM> Custom configuration
* Leginon/EM> Exposure time (ms)
* Leginon/EM> Exposure type ("normal" or "dark")
* Leginon/EM> Gain index
* Leginon/EM> Speed index (the read-out speed of the CCD)
* Leginon/EM> Mirror
* Leginon/EM> Rotate
* Leginon/EM> Shutter open delay
* Leginon/EM> Shutter close delay
* Leginon/EM> Preamp delay
* Leginon/EM> Parallel mode
______
[[Drift Manager|< Drift Manager]] | [[FFT Maker|FFT Maker >]]
______