Transform Manager » History » Version 3
Eric Hou, 06/24/2010 04:16 PM
| 1 | 1 | Amber Herold | h1. Transform Manager |
|---|---|---|---|
| 2 | |||
| 3 | 3 | Eric Hou | The Transform Manager handles all shift corrections that need to be done after drift is declared. The class will be expand to do transformation other than shift in the future. |
| 4 | 1 | Amber Herold | |
| 5 | 3 | Eric Hou | By the request of an Acquisition Node, the transform manager reaquires ancestors of the target that requires transformation in order to create the transformed target. |
| 6 | 1 | Amber Herold | |
| 7 | 3 | Eric Hou | Any acquisition or focuser node that need target correction requires two bindings. |
| 8 | 1 | Amber Herold | |
| 9 | 3 | Eric Hou | AcquisitionNode or FocuserNode - (TransformTargetEvent) -> TransformManagerNode |
| 10 | TransformManagerNode-(TransformTargetDoneEvent) -> AcquisitionNode orFocuserNode |
||
| 11 | 1 | Amber Herold | |
| 12 | For TransformManager to change presets, two bindings are needed: |
||
| 13 | |||
| 14 | 3 | Eric Hou | TransformManagerNode - (ChangePresetEvent) -> PresetsManagerNode |
| 15 | PresetsManagerNode -(PresetChangedEvent) -> TransformManagerNode |
||
| 16 | 1 | Amber Herold | |
| 17 | h2. Settings |
||
| 18 | |||
| 19 | 3 | Eric Hou | * Minimal Magnification = 300. This setting sets a lower limit to the ancestor image reacquisition. It can be set to prevent going down to a magnification where the objective aperture inserted after the original image was acquired prevents correlation between the reaquired image (with aperture) and the original (without aperture). Alternatively, it can be set to prevent the reacquisition that uses the LM mode. |
| 20 | 1 | Amber Herold | |
| 21 | h2. Toolbar |
||
| 22 | |||
| 23 | 3 | Eric Hou | * Declare Drift = force the Transform Manager to start drift correction sequence. |
| 24 | 2 | Amber Herold | |
| 25 | |||
| 26 | |||
| 27 | ______ |
||
| 28 | |||
| 29 | [[Tomography|< Tomography]] |
||
| 30 | |||
| 31 | 1 | Amber Herold | ______ |