Unable to initializ Tecnai interface error » History » Version 2
Anchi Cheng, 08/13/2014 04:19 PM
| 1 | 1 | Anchi Cheng | h1. Unable to initializ Tecnai interface error |
|---|---|---|---|
| 2 | |||
| 3 | There are two possible reason for this failure on FEI scopes |
||
| 4 | |||
| 5 | h2. TEM Scripting is not activated on this microscope |
||
| 6 | |||
| 7 | Ask your FEI engineer about it. |
||
| 8 | |||
| 9 | h2. TEM Scripting is not registered properly |
||
| 10 | |||
| 11 | This usually happens because something has overwritten it incorrectly. This can be fixed by registering it. |
||
| 12 | |||
| 13 | 2 | Anchi Cheng | {{include(find and register a dll file as command components in Windows)}} |