Project

General

Profile

Actions

Using Project Management Tools » History » Revision 3

« Previous | Revision 3/9 (diff) | Next »
Amber Herold, 04/15/2010 09:35 AM


Using Project Management Tools

  1. Recommendataion-Dividing projects by long-term goal
  2. Installation
  3. Go to project tools page
  4. Add a new project
  5. Edit an existing project
  6. Grid management

Project database and the php tools called "project" are designed to divide experiment
sessions into related groups. Experiments in each project usually are of the same of similar
specimens or under the same long-term goal. Security can be added to the data of a particular
project although the current release does not include the particular mechanism used at NRAMM.
Please contact us if you need such implementation. The results from different sessions of the
same project may be combined for analysis at some later point by Appion.

Recommendataion-Dividing projects by long-term goal

Division by long-term goal guarantee continuity across users.

Installation

If you have not created the project database, or have not install project_1_2 files to
your web server document area, please go back to Installation Chapter and perform the
installation and setup.

See <link linkend="Inst_Adm">Installation Troubleshooting</link> and Leginon Bulletin Board searching
for "project" if you run into problems.

Go to project tools page

Open a web browser. Go to http://yourhost/project_1_2

Add a new project

In the View Projects page

  • Click on "Add new project".
  • Only project name is a required entry
  • Click Add.

Edit an existing project

  • Click on "edit" in the project information page now appears.
  • Make your changes, including project name and save.

Grid management

You may register grid boxes and grids by projects. This is mainly used with grid handling
robot.

  • Click on Grid Tray
  • Add a new box under the heading "Grid Boxes". You can choose from one of the three
    existing format.
  • Add a new grid by clicking on new under the heading "Grids".
  • After the name and other optional information are added, click on "Add". This will
    add the grid box selection below the form.
  • Click on the location where the grid is to be placed, the page is updated and the
    page reloaded. Important: Do not click on "update" because it will remove your last
    location selection. Use the side-bar to go to "Grid Tray" page.

Updated by Amber Herold over 14 years ago · 3 revisions