Leginon not taking exposure from exposure targeting
Added by Bob Grassucci over 10 years ago
I am using the Krios at Janelia Farm and Leginon does not take an exposure after sending the exposure target from exposure targeting. It simply proceeds to the next hole. The queuing option is not selected and exposure id in the exposure node list and fc is selected in focus node list. We have a grid in the scope and are waiting for a reply. Please include Jason de la Cruz from Janelia on the reply. Thanks.
Bob
Even though we can get the fucussing to work we are unable to get an exposure. We suspect a problem with the node bindings. please advise.
Unfortunately another exposure advanced option was selected i.e. process meter targets rather than acquisition targets. I think we are good now.
Bob
Replies (3)
RE: Leginon not taking exposure from exposure targeting - Added by Anchi Cheng over 10 years ago
Sorry I am slow in replying this. Are you good now ?
RE: Leginon not taking exposure from exposure targeting - Added by Anchi Cheng over 10 years ago
If you get meter as Exposure Node processing target type, it is possible that default settings are not loaded during the installation.
See http://emg.nysbc.org/boards/6/topics/1889?r=1890#message-1890 and check if you have the same problem.
RE: Leginon not taking exposure from exposure targeting - Added by Bob Grassucci over 10 years ago
In this instance being slow helped. Yes we are good now. The default settings were set so that the exposure would not happen. I chaulk it up to a learning experience ;)
I will pass your post along to Janelia so that they can check it. Thanks.