MSI-T Z_Focus
Added by Bob Grassucci over 13 years ago
During a recent session we had a not so flat grid. I set up z_Focus to use Stage Wobble to reset the z height between squares. This worked OK when I used sq mode (550x mag)for a rough setting. Is it possible to insert another stage wobble using hl (5000X mag)? I tried typing it in and adding it but it did not work. I assume that it only does the z_focus between squares. Is that correct? If so it should not slow things too much and would only be enabled when there is a less than flat grid. Thanks.
Replies (2)
RE: MSI-T Z_Focus - Added by Anchi Cheng over 13 years ago
You can certainly add a focus sequence to z_Focus. It looks like our gui was not intuitive enough. I just added an illustrated version using what you want to do as an example. Adding_a_new_focus_sequence_to_a_focus_node
RE: MSI-T Z_Focus - Added by Bob Grassucci over 13 years ago
OK I see what I did wrong. I assumed that I needed to name it Stage_wobble as well. I see that it needs have a different name or it does not permit it. This should be helpful. Thanks.