Install the Web Interface » History » Revision 41
Revision 40 (Anchi Cheng, 06/06/2010 10:50 PM) → Revision 41/56 (Jim Pulokas, 06/14/2010 12:24 PM)
h1. Install the Web Interface Install Leginon and Appion web tools for viewing images and performing image processing through the web server. h2. 1. Install pyami If you have not yet installed Leginon/Appion python packages on this server, the web interface will at least need to the myami/pyami package to do MRC to JPEG conversion. Install myami/pyami as follows: <pre> cd myami cd pyami python setup.py install </pre> This will install the script "mrc2any" into /usr/bin/mrc2any (for typical linux system). You can customize the location with options to the setup.py command. To be sure where it was installed, run: <pre> which mrc2any </pre> You will need to know that location when configuring below. h2. 2. Move the myami/myamiweb directory to your Apache web directory Example: <pre> cd myami #CentOS example sudo cp -vr myamiweb /var/www/html/ #this is temporary for setup, revert to 755 when finished with this page sudo chmod 777 /var/www/html/myamiweb </pre> h2. 3. 2. Configure your installation There is a setup wizard available to help you set the configuration parameters for your installation. If you prefer not to use the wizard, there are instructions for manually editing the configuration file. If this is your first time creating the web tool configuration file, we recommend using the setup wizard. h3. Configuration using the setup wizard * Run the online setup wizard by visiting http://yourhost/myamiweb/setup or http://localhost/myamiweb/setup to create the myami website’s config file. * You need to know your database setup before you start. If you have been using the parameters in this instruction, here is a [[Explanation of Sample Names|summary]]. * You also need to decide whether you would like to enable the [[appion:What does User Authentication do to myamiweb|user management system]]. * The setup wizard will check your database connection, create required database tables, and perform default data initialization. h3. Manual configuration instructions (Advanced User) Go to [[Install the Web Interface Advanced]] for the advanced configuration. h2. 4. 3. Revert permissions <pre> sudo chmod 755 /var/www/html/myamiweb </pre> h2. 5. 4. Test the installation Visit http://yourhost/myamiweb or http://localhost/myamiweb to confirm functionality. ______ [[Install the MRC PHP Extension|< Install the MRC PHP Extension]] | [[Install phpMyAdmin|Install phpMyAdmin >]] ______