Setup job submission server » History » Version 16
Neil Voss, 05/27/2010 11:18 AM
1 | 1 | Neil Voss | h1. Setup job submission server |
---|---|---|---|
2 | |||
3 | 6 | Neil Voss | In this case, we are setting up a job submission server that will have all of the data directories mounted and external packages installed (EMAN, Xmipp, etc.) on the system. Most institutions have a job submission server already, but the data is not accessible. Appion is not set up for this scenario except for large reconstruction jobs. |
4 | 1 | Neil Voss | |
5 | 7 | Neil Voss | ______ |
6 | |||
7 | 6 | Neil Voss | h2. PBS and the Torque Resource Manager |
8 | 1 | Neil Voss | |
9 | 6 | Neil Voss | PBS stands for a "Portable Batch System":http://en.wikipedia.org/wiki/Portable_Batch_System. It is a job submission system meaning that users submit many jobs and the server prioritizes and executes each job as resources permit. Below we show how to install the popular open source PBS system called "TORQUE":http://en.wikipedia.org/wiki/TORQUE_Resource_Manager. |
10 | 1 | Neil Voss | |
11 | 6 | Neil Voss | A TORQUE cluster consists of one head node and many compute nodes. The head node runs the *pbs_server daemon* and the compute nodes run the *pbs_mom daemon*. Client commands for submitting and managing jobs can be installed on any host (including hosts not running pbs_server or pbs_mom). More documentation about Torque is "available here.":http://www.clusterresources.com/products/torque/docs/ |
12 | |||
13 | 7 | Neil Voss | ______ |
14 | |||
15 | 6 | Neil Voss | h2. Head node installation |
16 | |||
17 | 14 | Neil Voss | h3. Install Torque-server |
18 | 6 | Neil Voss | |
19 | Torque available in with Fedora and CentOS 5.4 (through the EPEL). For YUM based systems type: |
||
20 | |||
21 | 1 | Neil Voss | <pre> |
22 | 6 | Neil Voss | sudo yum -y install torque-server torque-scheduler |
23 | 1 | Neil Voss | </pre> |
24 | 7 | Neil Voss | |
25 | 14 | Neil Voss | h3. Initialize Torque-server, because PATH setting you will need to become root |
26 | 8 | Neil Voss | |
27 | 10 | Neil Voss | <pre> |
28 | 12 | Neil Voss | sudo su |
29 | /usr/share/doc/torque-2.3.10/torque.setup root |
||
30 | exit |
||
31 | 10 | Neil Voss | </pre> |
32 | 9 | Neil Voss | |
33 | 8 | Neil Voss | h3. Activate Torque-server |
34 | |||
35 | Enable the torque pbs_mom daemon on reboot: |
||
36 | 1 | Neil Voss | |
37 | <pre> |
||
38 | 9 | Neil Voss | sudo /sbin/chkconfig pbs_server on |
39 | 15 | Neil Voss | sudo /sbin/service pbs_server restart |
40 | 8 | Neil Voss | </pre> |
41 | |||
42 | 16 | Neil Voss | h3. Add nodes to Torque-server nodes file: /var/torque/server_priv/nodes |
43 | 8 | Neil Voss | |
44 | 7 | Neil Voss | ______ |
45 | 1 | Neil Voss | |
46 | 6 | Neil Voss | h2. Compute node installation |
47 | |||
48 | h3. Install Torque-mom |
||
49 | |||
50 | Torque available in with Fedora and CentOS 5.4 (through the EPEL). For YUM based systems type: |
||
51 | |||
52 | <pre> |
||
53 | sudo yum -y install torque-mom torque-client |
||
54 | </pre> |
||
55 | |||
56 | h3. Activate Torque-mom |
||
57 | |||
58 | Enable the torque pbs_mom daemon on reboot: |
||
59 | |||
60 | <pre> |
||
61 | sudo /sbin/chkconfig pbs_mom on |
||
62 | sudo /sbin/service pbs_mom start |
||
63 | </pre> |
||
64 | 2 | Neil Voss | |
65 | _________ |
||
66 | |||
67 | 5 | Neil Voss | [[Setup Remote Processing|^ Setup Remote Processing]] | [[Configure web server to submit jobs|Configure web server to submit jobs >]] |
68 | 2 | Neil Voss | |
69 | ______ |