Actions
Adding DE-12 to Leginon » History » Revision 5
« Previous |
Revision 5/16
(diff)
| Next »
Anchi Cheng, 06/08/2012 03:07 PM
Installation Guide for DE-12¶
Adding DE-12 and DE Suvey camera to existing Leginon system¶
Follow instruction on Installation_on_the_microscope_computer. Set both camera on the same z-plane in instruments.cfg
Testing¶
- DE-12 is on a computer separated from the microscope. Please read Using_Leginon_on_a_system_where_the_microscope_and_camera_are_controlled_by_different_computers first.
- Here are the relevant tests:
Proceed to test and run it like any other camera with Leginon "Manual_Application"
Updated by Anchi Cheng over 12 years ago · 5 revisions