Project

General

Profile

Adding DE-12 to Leginon » History » Revision 8

Revision 7 (Anchi Cheng, 06/08/2012 03:11 PM) → Revision 8/16 (Anchi Cheng, 01/09/2014 09:04 PM)

h1. Installation Guide for DE-12 

 h2. Adding DE-12 and DE Suvey camera to existing Leginon system 

 Follow instruction on [[Installation_on_the_microscope_computer]].    Set both camera on the same z-plane in instruments.cfg 

 [[Instrument.cfg for DE-12]] 
 


 h2. Testing 

 * DE-12 is on a computer separated from the microscope.    Please read [[Using_Leginon_on_a_system_where_the_microscope_and_camera_are_controlled_by_different_computers]] first. 

 * Here are the relevant tests: 
 ** [[Test Network Connection Between Remote and Microscope Computers|Test Network Connection Between Remote and DECamera Computers]] 
 ** [[Run Leginon Client on the Microscope Computer|Run Leginon Client on Both Microscope Computer and the DECamera computer]] 
 ** [[Start Leginon at your main working station remotely]] 

 Proceed to test and run it like any other camera with [[Leginon "Manual_Application"]]