Leginon

h1. Installation on the instrument computers

Only processing-side of Leginon system is needed.  This same procedure should be

performed on *EACH* instrument computer you want to use Leginon on.  Same procedure is to be repeated if new instrument is added.

For situation with the microscope operated at 2 different HT values which gives different magnification set, such as EFTEM mode vs TEM mode, it is better dealt with as different microscope. message#2499 shows how to add a Tecnai subclass to give a new identity to the special mode.

h3. You need to know what microscope and camera you are controlling before starting this.

h2. [[Windows Package Requirement 30|Package Requirement and Download]]

h2. [[Windows Installation All|Installation Required by all instruments]]

h2. [[Windows Myami Configuration|Configuration related to Leginon]]

h2. [[installation on the microscope computer 30|Additional installation specific to the microscope]]

h2. [[installation on the camera computer|Additional installation specific to the camera]]

h2. [[Windows Setup After Software Installation|Additional Setup]]

h2. [[Trouble shooting with Python IDLE]]

____

{{include(installation on the microscope computer 30)}}

_____

{{include(Installation on the camera computer)}}

______

[[Additional Database Server Setup after Web Server Installation|< Additional Database Server Setup]] | [[Steps involved in the installation| Steps needed for Installation Using Database Administration Tools >]]

______