Installation on the instrument computers¶

If you are installing 2.2, see Installation on the microscope computer for 2.2¶

Only processing-side of Leginon system is needed

Package Requirement and Download¶

Installation¶

Configuration related to Leginon¶

Additional Setup¶

---

Specific notes for various microscopes¶

Installation specific for FEI Tecnai/Titan/Krios running on 32-bit computer or 64-bit computer¶

Installation specific for FEI Talos/Arctica/Glacios with pre-installed 64-bit python¶

Installation specific for JEOL scopes with COM support¶

Jeol 1230 installation specifics¶

Hitachi 7800 installation specifics¶

---

< Installation Required by all instruments | Additional installation specific to the camera >

---

---

Specific installation/setup notes for various camera¶

TVIPS¶

• Tietz camera installation and setup using directly CAMC4 (older method)
• or Tietz camera installation and setup using EM-MENU scripting (workaround on newer system)

Gatan (CCD/CMOS camera)¶

• Non-K2/K3 Gatan Camera

Gatan K2¶

• Gatan K2 installation and setup
• instrument.cfg setup on FEI scope where K2 fakes another camera in order to control the shutter

Gatan K3¶

• Gatan K3 installation and setup

FEI Eagle¶

• Eagle camera installation and setup

FEI Ceta¶

• Ceta camera support

Falcon I or II/Orius Combination¶

• Falcon camera support

Falcon 3EC¶

• Falcon 3 support

DE-12/DE-20¶

• Adding DE direct detectors to Leginon

---

< Additional installation specific to the microscope | Additional Setup >
___

---

< Additional Database Server Setup | Steps needed for Installation Using Database Administration Tools >

---