Project

General

Profile

Actions
History

Leginon Homepage » Leginon Manual » Complete Installation » Installation on the instrument computers »

Installation on the microscope computer 30 » History » Revision 33

« Previous | Revision 33/70 (diff) | Next »
Anchi Cheng, 10/31/2013 04:07 PM

Installation on the microscope computer (svn trunk)

If you are installing 2.2, see Installation on the microscope computer

Only processing-side of Leginon system is needed

Package Requirement and Download

Installation

Add the IP address and matching hostname of the microscope and digital camera computer in your host file on the main Leginon computer, and vice versa.

Find out what python thinks the hostname is with python command line. REPEAT this both on Linux and Windows PC

Run the following in python command line:

import socket
socket.gethostname()

Find out the ip address associated with the hostname

Run the following in python command line:

import socket
socket.gethostbyname('your_host_name')

Modify your "hosts" file on the linux Leginon computer to include the instrument hosts if the latter is not already mapped by your domain name server

  • On Linux, this "hosts" file is at

/etc/hosts

Example of a "hosts" file:

192.000.1.222   instrument_host_name.domain_name instrument_short_host_name

Use shorter linux hostname if desired

If you'd like to shorten your linux hostname recognized by socket without the domain name, you may do so as root

hostname your_shorter_hostname

and also add that to the /etc/hosts as an alternative name

192.000.1.333   long_host_name.domain_name your_shorter_hostname

You will need to restart networking to make it persistent.

/etc/init.d/network restart

Test the change by finding the ip address with the hostname as in the above section.

The Linux main Leginon computer also needs to identify itself by its hostname registered on the instrument Windows computer.

  • On Window XP and WIndows 7 this host file is

C:\\WINDOWS\system32\drivers\etc\hosts

  • On Window NT, this host file is

C:\\WINNT\system32\drivers\etc\hosts

Register TecnaiCCD.dll, CAMC4.exe (For Tietz camera), and adaexp.exe (For film exposure)

  • From the command prompt, run the following commands. You may need to enter the full path of the exe or dll:
    adaexp.exe /regserver
CAMC4.exe /regserver
REGSVR32 TecnaiCCD.dll

Install Python and supporting packages with their installers

Program package web site local copy of win32 installer local copy of amd64 installer
Python > 2.7.10 http://www.python.org python-2.7.16.msi python-2.7.18.amd64.msi
wxPython 2.8 or newer http://www.wxpython.org wxPython2.8-win32-unicode-2.8.12.1-py27.exe wxPython2.8-win64-unicode-2.8.12.1-py27.exe
MySQL Python client 1.2 or newer http://sourceforge.net/projects/mysql-python MySQL-python-1.2.4b4.win32-py2.7.exe MySQL-python-1.2.3.win-amd64-py2.7.exe
Python Imaging Library (PIL) 1.1.4 or newer http://www.pythonware.com/products/pil/ PIL-1.1.7.win32-py2.7.exe PIL-fork-1.1.7.win-amd64-py2.7.exe
NumPy (use only from our file to match compiled numextension numpy-1.7.0-win32-python2.7.exe numpy-MKL-1.6.2.win-amd64-py2.7.exe
SciPy 0.5.1 or newer http://www.scipy.org scipy-0.11.0-win32-superpack-python2.7.exe scipy-0.11.0.win-amd64-py2.7.exe
Use pyMySQL for leginon 3.6 and above instead of MySQL Python client for both win32 and 64.
pyMySQL 0.10.1 (not higher) https://pypi.org/project/PyMySQL/ pyMySQL-0.10.1-py2.py3-none-any.whl

Excute the installer files and follow the instructions.

Install the Windows Installer Files from created from source by NRAMM

Package win32 amd64
numextension numextension-svn.win32-py2.7-numpy1.7.0.exe numextension-svn.win-amd64-py2.7-numpy1.6.2.exe

Execute the installer files and follow the instructions.

Check out SVN Source Files from the repository

Use your mouse to do the following
  • Create LeginonTrunk directory somewhere at your convenience
  • Change directory into LeginonTrunk
  • Right-click the mouse botton in this directory window and select Tortoise svn
    Checkout in the menu:

Install the packages you downloaded from NRAMM svn repository

The svn checkout is a folder containing several subpackages. You will install the python packages using python installer

These are the sub-packages

Name: Purpose:
leginon modular TEM image acquisition
pyami general functions
sinedon Leginon/database interaction
pyscope microscope control and monitoring
imageviewer image viewing for tomography

numextension is installed with window installer. libcv is not required by Leginon client that this installation is aimed for.

  • Start a command line Window from Start Menu
  • Install the package in each folder with commands such as
    cd Your_Download_Place\LeginonTrunk\leginon
c:\\python27\python.exe setup.py install

    Then continue with the other packages, replacing leginon with the package name. See "These are the sub-packages of myami that you will install with the python installer." section above for complete list.

Modify comtypes if TIA controlling camera is used or Gatan camera is controlled by older, 32-bit computer.

IMPORTANT: After installing comtypes, you must make one modification to it. The module "safearray.py" that comes with comtypes must be replaced with a modified version that we provide. You can find the custom version of safearray.py in the pyscope package. Please copy this module from pyscope into the installed comtypes folder: C:\Python2*\Lib\site-packages\comtypes\. It should replace the safearray.py that is included in comtypes.

TIA controlling camera only:

(Reported by a user as a necessary step on his system. May not be necessary) Copy TecnaiCCD.dll and stdscript.dll into pyscope folder

Run updatecom.py

From a command line window:

cd C:\python27\Lib\Site-Packages\pyScope
C:\python27\python.exe updatecom.py

The python window appears should say show the required type libraries it found:

Generating .py files from type libraries...
initializing TEM Scripting Error, cannot find typelib for "TEM Scripting" 
initializing Tecnai Scripting done.
initializing TOM Moniker done.
initializing Tecnai Low Dose Kit done.
initializing Tecnai Exposure Adaptor done.

initializing Tietz CCD Camera done.

The output is of course depending on what is available on your microscope computer. You should have either "Tecnai Scripting" or the pairing of "TEM Scripting" and "TOM Moniker".

You will only find Tecnai Exposure Adaptor (Scripting for film exposure) if you ask FEI for it.

The script should generate a few files in C:\\python27\Lib\win32com\gen_py with seemly scrambled names such as BC0A2B03-19FF-11D3-AE00-00A024CBA50Cx0x1x9.py

Locate global configuration directory following standard on Windows

Saving cfg files in a global location reduces future need for copying old configuration to updated installation. The location is different for different versions of Windows. To locate the one for your Windows version:

  1. go to C:\\python27\Lib\site-packages\leginon
  2. run configcheck.py

The script gives the three search directories of the cfg files and the loaded file if present. Note the first search directory that with a name most likely start with C:\\Programs and ends with \myami. This is the global configuration directory we will use.

Configure leginon.cfg:

Follow the instructions in Configure leginon.cfg located in the section for Linux installation but note the location of the configuration files follows. In addition, if the storage disk is mapped onto the Windows PC as drive Z, this mapping should be included in leginon.cfg. See below.

  • Configurations for all users and all local copy and installation of leginon (Recommended on the microscope computer since users are not expected to start the main processing here) 
     <Global configuration directory>\leginon.cfg

    Example:

     C:\Programs\myami\leginon.cfg

  • The skeleton (default) configuration file is available at: 
     C:\Python27\Lib\site-packages\leginon\leginon.cfg.template

Configure sinedon.cfg:

Follow instruction in Configure sinedon.cfg in the section for Linux installation but note the location of the configuration files follows.

  • (Recommanded on microscope computer) For all users, put sinedon.cfg in the global configuration directory such as
    C:\Programs\myami\sinedon.cfg
  • the skeleton sinedon configuration file is
    C:\Python27\Lib\site-packages\sinedon\examples\sinedon.cfg

Configure instruments.cfg:

  • A template for instruments.cfg is in the installed pyscope directory as "instruments.cfg.template". Copy it to
    C:\Programs\myami\instruments.cfg
  • Remove the Sim Tem and Sim Cam modules in the configuration.
  • Add the modules for your microscope and camera.
    • If you have Direct Electron camera DE12, your camera module.class is de.DE12
    • If your microscope uses Tecnai Scripting Interface, youe scope module.class is tecnai.Tecnai
    • If you have a Gatan camera running on the microscope computer that you interface through DigitalMicrograph, your camera module.class is gatan.Gatan
    • If you have a Gatan K2 Summit running on its only 64-bit computer, your camera module is dmsem and three cameras are added. See Gatan K2 Installation Notes
    • If you have a Tietz camera, there are several choices for the "class" field. Run the tietztest.py script that comes in pyscope to tell you your available options.

TEM

cs is the coefficient of spherical aberration in meters. Find out from TEM manufacture the proper value for your tem.
For example

[tem]
class: fei.Tecnai
cs: 2.0e-3

Camera

height and width are number of pixels based on the orientation presented in Leginon image viewer
  • Some Tietz camera may have an odd physical dimension. Use TCL/EMMenu program to find out the good dimension used in Tietz's own software and entered in this configuration.

For example

[camera]
class: gatan.Gatan
zplane: 50
height: 4096
width: 4096

zplane is a number that gives the order of camera. If a camera with low zplane value is going to acquire an image, Leginon will attempt to retract all cameras at higher zplane values.

HEIGHT and WIDTH are not shown in these examples for simplicity
  • One computer for both tem and digital camera:
    [tem]
class: fei.Tecnai
cs: 2.0e-3
[camera]
class: gatan.Gatan
zplane: 50
  • Separate computers for the two instruments: configure only the instrument reside on the particular computer
    • On the computer that controls the tem:
      [tem]
class: fei.Tecnai
cs: 2.0e-3
    • On the computer that controls the digital camera:
      [camera]
class: gatan.Gatan
zplane: 50
  • Two camera at the same plane:
    • On the computer that controls the digital camera:

      DE12 and DE Survey camera are retract/extend together, with the survey camera at off-axis. Therefore zplane should be set at the same value
      For example,

      [camera1]
class: de.DE12
zplane: 50

[camera2]
class: de.DESurvey
zplane: 50

  • Gatan Orius camera that is installed typically with Gatan K2/Falcon camera is technically on the same plane but is not capable of insertion unless K2 is retracted. On the other hand, K2 camera insertion includes a retraction of Orius at lower level of the function call in DM. Therefore, Orius is considered as a camera at lower zplane.
    [camera1]
class: dmsem.GatanK2Base
zplane: 50

[camera2]
class: dmsem.GatanOrius
zplane: 49

The file contains other examples of microscope and camera drivers that we distribute from NRAMM.

Additional setup on Tietz cameras

Register the Tietz ping callback function. From a command line window:

cd C:\python27\Lib\Site-Packages\pyscope
C:\python27\python.exe tietzping.py

Troubleshooting Tietz cameras:

When Leginon initializes the camera, a program called CAMC4 should start automatically in the backgound. This is confirmed by the little camera icon showing up in the system tray in the lower right of the screen. Also, task manager can be started to confirm CAMC4 is running. Sometimes problems occur if more than one CAMC4 is running at the same time, so task manager will help identify this.

CAMC4 has its own configuration file "CAMC.ini" that will normally be set up already, but you can search for it on your computer and confirm that everything looks right. It will have configuration parameters for several cameras and only one of them will be activated. The only parameter that may need some adjustment is the readout geometry, which affects the rotation and mirror of the image.

If Leginon is not initializing the camera or not getting proper images, you should first test image acquisition using TVIPS software to make sure it is not a hardware issue. Use TCL or there is a test program called TestMFCCamera that can acquire an image and test the CAMC4 operation.

For strange dimension cameras

Unless it is Gatan K2 where it uses flooring when dealing determining camera dimension when binning, you will do better specify a value that can be divided by power of 2 in width and height in instruments.cfg. Examples of this type of configuration can be found in some Tietz camera. Use Tietz's image acquisition software to find out what they use as a guide.

Create Leginon Admin and Leginon Client shortcut in Start menu menu under Leginon

This instruction applies to Windows XP.

  • Go to C:\Documents and Settings\All Users\Start Menu\Programs\ and create a new
    folder named Leginon.
  • In another window, go to
    C:\Python27\Lib\site-packages\leginon
  • Create a shortcut from start-leginon.py as "Leginon Admin" and a shortcut from launcher.py as "Leginon Client".
  • Move the two shortcuts into
    C:\Documents and Settings\All Users\Start Menu\Programs\Leginon

Mapping Drives (Optional):

Although we don't recommend it, it is possible to run minimal Leginon directly on the Windows machine, Since the database and web servers are not there, you probably will be saving the images through a Samba server on a network drive also available to the Linux machine. If you do so, you will need to map the network drive. For example, if your Samba server has a hostname your_smbserver, and you have set up a share called [your_share_point] which points to /your_data_path/ and leginon data will be saved under a folder in /your_data_path/leginon/.

  • Start, My Computer
  • Tools menu, Map network drive
  • Use an unmapped drive such as Z:

    Enter shared path in Windows format as

    \\your_smbserver\your_share_point

  • Add the drive and the Linux path to leginon.cfg on the Windows machine as
    [Drive Mapping]
Z:/your_data_path
  • Add image path to leginon.cfg on the Windows machine in Linux format as
    [Images]
path:/your_data_path/leginon

Additional Software (Optional):

TightVNC (http://www.tightvnc.com) if you get tired of going into the microscope room just to open the column valves.

Gatan K2 Experimental support:

Falcon/Orius Combination Suport:

< Additional Database Server Setup | Steps needed for Installation Using Database Administration Tools >

Updated by Anchi Cheng almost 11 years ago · 33 revisions