Minimum Requirements and current NRAMM setup » History » Revision 65
Revision 64 (Anchi Cheng, 09/14/2017 07:26 PM) → Revision 65/75 (Anchi Cheng, 09/14/2017 07:44 PM)
h1. Minimum Requirements
h2. [[Compatible Instrument]]
h2. Second Computer Running CentOS 6
[[Minimum Requirements for frame-saving direct detectors]]
[[Minimum Requirements for non-frame-saving camera]]
h2, [[Current NRAMM setup]]
h2. [[SEMC file storage policy]]
and policy for file storage:
# 10 Gbs network between frame saving camera and the file server.
# Raw frames are transferred off camera with rsync using [[DDD raw frame file transfer|rawtransfer.py]] which also removed the finished frame stack on the camera to make room for more to come.
# These raw frames are needed if default frame processing does not give optimal results. We keep these on network drive for 30 days and make it user's responsibility to archive this on external drives. bzip or bzip2 are commonly used by the users to compress the files. Since the raw frames are integers, it can be easily compressed to 4-10 times smaller.
# In the [[appion:GainDark_correction_of_the_raw_frame_with_or_without_drift_correction|frame processing]] Appion script, if frame alignment is performed (usually finished within a day or two after data acquisition), the aligned frame stack is removed right away after integrating into single sum image to save space.
# User will use the summed aligned-movie saved in the Leginon database as "-a" images. 95% of the users do not require frame-aligned stack after this point.
- 10GB network card to support direct transfer from K2 camera and connection to the scope.
h1. Software
h2. Leginon system components developed at Leginon home
Leginon Home: "http://www.leginon.org/":http://www.leginon.org/
h2. Supporting packages and programs available through internet or your Linux distribution
There are minimum of ten packages or single programs, some of them are included in your
Linux distribution.
h2. Leginon supporting programs available upon request
*adaexp.exe* that is required if film exposure is to be made through Leginon on FEI Tecnai
machines is available by request. Please contact Max Otten: (mto at nl.feico.com)
and let him know what version of the Tecnai user interface you are using.
______
[[Graphical User Interface|< Graphical User Interface]] | [[Getting Started|Getting Started >]]
______