Setup and Calibration for jeolcfg » History » Version 2
Anchi Cheng, 03/06/2015 03:02 PM
| 1 | 1 | Anchi Cheng | h1. Setup and Calibration for jeol.cfg |
|---|---|---|---|
| 2 | |||
| 3 | 2 | Anchi Cheng | All setup and calibrations are done on the computer that has access to JEOL's External COM through temext.dll. |
| 4 | 1 | Anchi Cheng | |
| 5 | h2. Copy from pyscope/jeol.cfg.template to pyscope/jeol.cfg |
||
| 6 | |||
| 7 | The template is based on a JEM-2100F |
||
| 8 | 2 | Anchi Cheng | |
| 9 | h2. Modify values in pyscope/jeol.cfg according to pyscope/scalecalibrator.py |
||
| 10 | |||
| 11 | This is done manually until I finalize the procedure and set them automatically. |
||
| 12 | |||
| 13 | # Open pyscope/jeol.cfg with a text editor |
||
| 14 | # Modify "tem option" module values according to your tem. |
||
| 15 | # Save the changes and leave it open so that you can enter values as you go. |