Summary of this application » History » Revision 2
Revision 1 (Amber Herold, 04/23/2010 08:28 AM) → Revision 2/5 (Amber Herold, 04/27/2010 11:50 AM)
h1. Summary of this application h2. MSI-Edge uses a template matching of the Edge image for hole finding both in "Hole Targeting" and "Exposure Targeting". See the previous chapter for general description of all MSI applications: <link linkend="preleg1setup">Pre-MSI Set-up</link>: Prior to setting up Leginon for the day, make sure that Leginon has been previously set-up (this step is in case the ambitious user decides to proceed to this section for the first time and hasn't gone through all the calibrations...). <link linkend="MSI_pref">MSI preference & configuration</link>: The comprehensive MSI preferences and configuration example. <link linkend="MISQuickStart">MSI Quick Start checklist</link>: A short check list for users who are familiar with the application and have saved preferences. <link linkend="MSISetupDetails">MSI set-up in more details</link>: The more complicated MSI Leginon application set-up that should be completed before collecting data. <link linkend="MSIQueue">MSI queuing option</link>: Introduction to the queuing option. <link linkend="QExpTarget">MSI Exposure Target queuing</link>: The setup and operation of queuing mode for large number of exposure targets and/or for avoiding accessing sq presets after initial acquisition and targeting. <link linkend="QHoleTarget">MSI Hole Target queuing</link>: The setup and operation of queuing mode recommanded for quick overall survey of rare hole targets in grid squares. <link linkend="MSI_troubleshooting">MSI Trouble shooting</link>: This trouble shooting sections addresses some of the possible challenges a Leginon user may face while using the MSI application. ______ [[Hole Targeting Set-up for MSI-Edge|Hole Targeting Set-up for MSI-Edge >]] ______