Summary of this application » History » Revision 4
Revision 3 (Amber Herold, 06/22/2010 02:31 PM) → Revision 4/5 (Anchi Cheng, 12/02/2010 12:02 AM)
h1. Summary of this application MSI-Edge uses a template matching of the Edge image for hole finding both in "Hole Targeting" and "Exposure Targeting". See the previous chapter for general description of all MSI applications: [[Pre-MSI Set-up|Pre-MSI Set-up]]: Prior to setting up Leginon for the day, make sure that Leginon has been previously set-up (this step is in case the ambitious user decides to proceed to this section for the first time and hasn't gone through all the calibrations...). [[Initial MSI application preference setup|MSI preferences and configuration]]: The comprehensive MSI preferences and configuration example. [[MSI Quick-start|MSI Quick Start checklist]]: A short check list for users who are familiar with the application and have saved preferences. [[MSI set-up in more details|MSI set-up in more details]]: The more complicated MSI Leginon application set-up that should be completed before collecting data. [[Queuing option|MSI queuing option]]: Introduction to the queuing option. [[Queuing Example 1: Exposure Targeting|MSI Exposure Target queuing]]: The setup and operation of queuing mode for large number of exposure targets and/or for avoiding accessing sq presets after initial acquisition and targeting. [[Queuing Example 2: Hole Targeting only|MSI Hole Target queuing]]: The setup and operation of queuing mode recommended for quick overall survey of rare hole targets in grid squares. [[Trouble shooting|MSI Trouble shooting]]: This trouble shooting sections addresses some of the possible challenges a Leginon user may face while using the MSI application. ______ [[Edge Hole Finder Set-up|Edge Hole Finder [[Hole Targeting Set-up for MSI-Edge|Hole Targeting Set-up for MSI-Edge >]] ______