Leginon

h1. Summary of this application

MSI-Edge uses a template matching of the Edge image for hole finding both in "Hole Targeting" and "Exposure Targeting".

See the previous chapter for general description of all MSI applications:

[[Pre-MSI Set-up|Pre-MSI Set-up]]: Prior to setting up Leginon for the day, make sure that Leginon has been previously set-up (this step is in case the ambitious user decides to proceed to this section for the first time and hasn't gone through all the calibrations...).

[[Initial MSI application preference setup|MSI preferences and configuration]]: The comprehensive MSI preferences and configuration example.

[[MSI Quick-start|MSI Quick Start checklist]]: A short check list for users who are familiar with the application and have saved preferences.

[[MSI set-up in more details|MSI set-up in more details]]: The more complicated MSI Leginon application set-up that should be completed before collecting data.

[[Queuing option|MSI queuing option]]: Introduction to the queuing option.

[[Queuing Example 1 - Exposure Targeting]]: The setup and operation of queuing mode for large number of exposure targets and/or for avoiding accessing sq presets after initial acquisition and targeting.

[[Queuing Example 2 - Hole Targeting only]]: The setup and operation of queuing mode recommended for quick overall survey of rare hole targets in grid squares.

[[Queuing Example 3 - Both Exposure and Hole Targeting]]: Use this only after you are familiar with the queuing operation.

[[Trouble shooting|MSI Trouble shooting]]: This trouble shooting sections addresses some of the possible challenges a Leginon user may face while using the MSI application.

______

[[Edge Hole Finder Set-up|Edge Hole Finder Set-up >]]

______