Tivips f416 electron diffraction recording » History » Version 4
Anchi Cheng, 12/12/2019 06:48 PM
| 1 | 1 | Anchi Cheng | h1. TVIPS f416 electron diffraction recording |
|---|---|---|---|
| 2 | |||
| 3 | TVIPS F416 camera has rolling shutter movie collection capacity, accessible through EMMENU. |
||
| 4 | |||
| 5 | h2. Leginon view port configuration setup |
||
| 6 | |||
| 7 | This setup will be used by Leginon to control view port 1. The configurations will be changed through EMMNENU scripting |
||
| 8 | |||
| 9 | h2. Recorder configuration |
||
| 10 | |||
| 11 | h3. Make sure recorder tool (red dot) is shown in toolbar |
||
| 12 | |||
| 13 | 3 | Anchi Cheng | Reach toolbar view selection through EMMENU4/View/Toolbar> |
| 14 | 1 | Anchi Cheng | |
| 15 | !RecorderToolbar.png! |
||
| 16 | |||
| 17 | h3. Set recorder options |
||
| 18 | |||
| 19 | Click on the hammer next to the recorder tool to set these. |
||
| 20 | |||
| 21 | Basic settings |
||
| 22 | !RecorderBasicSettings.png! |
||
| 23 | |||
| 24 | 2 | Anchi Cheng | Advanced settings: save in tvips image set format |
| 25 | 1 | Anchi Cheng | !RecorderAdvancedSettings.png! |
| 26 | 4 | Anchi Cheng | |
| 27 | h2. Leginon instruments.cfg |
||
| 28 | |||
| 29 | Replace |
||
| 30 | <pre> |
||
| 31 | class:tietz.TietzF416 |
||
| 32 | </pre> |
||
| 33 | with |
||
| 34 | <pre> |
||
| 35 | clas:tietz2.EmMenuF416 |
||
| 36 | </pre> |
||
| 37 | |||
| 38 | h2. Set up tvips.cfg |
||
| 39 | |||
| 40 | # Copy pyscope/tvips.cfg.template to the same directory where instruments.cfg is read on TVIPS PC and rename it as *tvips.cfg* |
||
| 41 | # Match the recorder directory and default filename with what is in EMMENU4 recorder settings. |