Leginon

h1. Using Project Management Tools

# [[Recommendataion-Dividing projects by long-term goal]]

# [[Installation]]

# [[Go to project tools page]]

# [[Add a new project]]

# [[Edit an existing project]]

# [[Grid management]]

Project database and the php tools called "project" are designed to divide experiment

sessions into related groups. Experiments in each project usually are of the same of similar

specimens or under the same long-term goal.  Security can be added to the data of a particular

project although the current release does not include the particular mechanism used at NRAMM.

Please contact us if you need such implementation.  The results from different sessions of the

same project may be combined for analysis at some later point by Appion.

h2.  Recommendataion-Dividing projects by long-term goal

Division by long-term goal guarantee continuity across users.

h2.  Installation

If you have not created the project database, or have not install project_1_2 files to

your web server document area, please go back to Installation Chapter and perform the

installation and setup.

See <link linkend="Inst_Adm">Installation Troubleshooting</link> and  "Leginon Bulletin Board":http://emg.nysbc.org/bb/viewforum.php?f=2  searching

for "project" if you run into problems.

h2. Go to project tools page

Open a web browser. Go to http://yourhost/project_1_2

h2. Add a new project

In the View Projects page

*  At http://yourhost/project, click on View Projects if the project summary is not

shown.

*  Click on "Add new project".

*  Only project name is a required entry

*  Click Add.

h2.  Edit an existing project

*  At http://yourhost/dbem/getprojects.php, click on the name of the project to be

edited.

*  Click on "edit" in the project information page now appears.

*  Make your changes, including project name and save.

h2.  Grid management

You may register grid boxes and grids by projects.  This is mainly used with grid handling

robot.

*  Click on Grid Tray

*  Add a new box under the heading "Grid Boxes". You can choose from one of the three

existing format.

*  Add a new grid by clicking on new under the heading "Grids".

*  After the name and other optional information are added, click on "Add".  This will

add the grid box selection below the form.

*  Click on the location where the grid is to be placed, the page is updated and the

page reloaded.  Important: Do not click on "update" because it will remove your last

location selection.  Use the side-bar to go to "Grid Tray" page.