Electron Microscopy Group

03/23/2016

05:07 PM Leginon Leginon: RE: No interfaces could be initialized

Hi Anchi-
Yep, once again a port issue: fixed by changing the SerialEMCCD port. Thanks for the rapid response.
... Gregory Alushin

03/22/2016

07:21 PM Leginon Leginon: No interfaces could be initialized

Hi Anchi-
We are still running leginon 3.1, which has been working well.
For some reason, leginon has lost the ... Gregory Alushin

02/27/2015

12:59 PM Leginon Leginon: RE: Image shift calibration trouble

Hi Anchi-
Thanks again for spotting my stupid mistake. Indeed, I changing the power of 10 to the proper value fix... Gregory Alushin

02/24/2015

11:27 AM Leginon Leginon: RE: dmsem.py fails to open local connection on K2 computer

OK managed to fix this one ourselves: apparently dmsem.py was fighting another process that randomly requested that p... Gregory Alushin

09:12 AM Leginon Leginon: dmsem.py fails to open local connection on K2 computer

Hi Anchi et al.-
I came back after being out of town excited to fix my silly pixel size error (oops). However, so... Gregory Alushin

02/19/2015

07:22 AM Leginon Leginon: RE: Image shift calibration trouble

whoops sorry I found it Gregory Alushin

07:20 AM Leginon Leginon: RE: Image shift calibration trouble

Hi Anchi-
The link to #3010 doesn't say what the fix is. I'll try the fix if you can tell me what code to modify. Gregory Alushin

02/18/2015

06:05 PM Leginon Leginon: RE: Image shift calibration trouble

Hi Anchi-
I have run into a similar problem. We have upgraded to Leginon 3.1 running our F20 / K2.
For the pix... Gregory Alushin

05/12/2014

01:53 PM Leginon Appion: RE: Problem uploading images to a new session

Hi Amber-
Thanks for the reply. I edited the offending table with phpMyAdmin and the upload worked just fine.
... Gregory Alushin

07:57 AM Leginon Appion: Problem uploading images to a new session

Hello-
I have a newly installed appion 3.0 setup, where I plan on primarily uploading micrographs to the database.... Gregory Alushin