No interfaces could be initialized
Added by Gregory Alushin over 8 years ago
Hi Anchi-
We are still running leginon 3.1, which has been working well.
For some reason, leginon has lost the ability to communicate with our K2 after having to restart the K2 computer, throwing the error "No interfaces could be initialized" in the client window on the K2 computer. The computers can talk to one another (test1.py test2.py works). The error pops up when I try to load a preset from a previous session: the cameras available are shown as "none".
Any help would be appreciated!
Thanks,
-Greg
Replies (2)
RE: No interfaces could be initialized - Added by Anchi Cheng over 8 years ago
I recall that you had to change the port assignment at some point because of a block port. It may be a similar problem. Why would a previously working port stops working ? I don't know.
Check the ports with the command and/or the program CurrPorts which I have success with recently.
Check both ports in Trouble_shooting_semccd_socket_connection both on the port SerialEMCCD uses and the ports Leginon uses. It is most likely the former that is having problem.
RE: No interfaces could be initialized - Added by Gregory Alushin over 8 years ago
Hi Anchi-
Yep, once again a port issue: fixed by changing the SerialEMCCD port. Thanks for the rapid response.
Cheers,
-Greg