Actions
Feature #225
closedAllow averaging of multiple focus measurements.
Start date:
03/18/2010
Due date:
% Done:
0%
Estimated time:
Deliverable:
Description
I want to have a field in the Focus node to measure the focus N times and take the average. If you set up multiple focusing measurements it only takes the last reading.
Updated by Neil Voss almost 15 years ago
We could also do the measurements in different directions, see Feature #226.
Updated by Ed Brignole almost 15 years ago
Here's a simple scenario: User selects one focus target. Then leginon focuses twice. If the two measurements are within 0.5um then it's probably correct to average, but if you get answers that differ by more than 0.5um then focus is unreliable at this hole so just move on to the next. No reason to waste time collecting data on a hole that wasn't focused properly.
Updated by Neil Voss over 14 years ago
- Target version set to Appion/Leginon 2.1.0
Updated by Amber Herold over 14 years ago
- Target version changed from Appion/Leginon 2.1.0 to Appion/Leginon 2.2.0
Updated by Anchi Cheng about 7 years ago
- Is duplicate of Feature #3785: go through multiple focus target at each focus sequence step and correct with the average measurement added
Actions