Install Appion Packages¶

Install the package in each folder with commands like these¶

TODO: move these into a single installer, ask Jim

cd /your_download_area/

cd myami/leginon
sudo python setup.py install

cd ../pyami
sudo python setup.py install

cd ../pyscope
sudo python setup.py install

cd ../sinedon
sudo python setup.py install

cd ../imageviewer
sudo python setup.py install

cd ../appion
sudo python setup.py install

#binary packages

cd ../numextension
python setup.py build
sudo python setup.py install

cd ../libcv
python setup.py build
sudo python setup.py install

cd ../appion/radermacher
python setup.py build
sudo python setup.py install

python-site-package-path: where the installed python packages went:¶

Python installer put the packages you installed to its site-packages directory. This enable all users on the same computer to access them. The easiest way to find where your installed package is called by python is to load a module from the package using interactive python command lines like this:

• Start python command line from shell
  

  > python

• Import a module from the package. Let's try sinedon here. All packages installed through the above setup.py script should go to the same place.
  

  python> import sinedon

• If the module is loaded successfully, call the module attribute path (two underscrolls before "path" and two underscrolls after) will return the location of the module it is loaded from
  

        python> sinedon.__path__
  
        RETURNS, For example,
        python> <module 'sinedon' from '/usr/lib/python2.5/site-packages/sinedon/__init__.pyc'> 
  

  
  In this case, /usr/lib/python2.5/site-packages/ is your python-site-package-path. If you go to that directory, you will find all the packages you just installed.

< Perform system check | Configure leginon.cfg >