Actions
Reconstruction Parameters » History » Revision 11
« Previous |
Revision 11/37
(diff)
| Next »
Amber Herold, 05/31/2011 02:08 PM
Reconstruction Parameters¶
Name | a.k.a. | Description | Used By | Required in interface? | Notes |
---|---|---|---|---|---|
Mask Radius | mask | raduius of external map in pixels | xmipp, eman, imagic | ||
Inner Radius | Particle inner mask radius | inner radius for alignment in pixels | xmipp, frealign, spider | ||
imask | radius of internal mask (in pixels for eman and spider, Angstroms for frealign) | EMAN | |||
Outer Radius | xmipp | ||||
Particle outer mask radius (RO) | mask | radius from center of particle to outer edge (frealign in angstroms, spider in pixels) | frealign, spider | ||
amask | amask=[r],[threshold],[iter] | eman | |||
MRA - min radius for rotational alignment in pixels | imagic | ||||
MRA - max radius for rotational alignment in pixels | imagic | ||||
firstring | Any pixels this far away from center will not be used | spider | |||
lastring | Only pixels this far away will be used | spider | |||
xysearch | translational search during projection matching will be limited to this many pixels from the center ofthe image | spider | |||
Symmetry Group | sym | ex. c1, c2... | xmipp,eman,frealign,spider,imagic | ||
Number of iterations | iteration number | xmipp | |||
Mask Filename | xmipp | ||||
Angular reconstitution | angular increment of forward projections, ang inc of euler search, fraction of best ordered images to keep | imagic | |||
Angular Sampling Rate | xmipp | ||||
Max angular change | xmipp | ||||
max change offset | xmipp | ||||
Search range for 5d transitional search | xmipp | ||||
Discard % of image with CCF below | xmipp | ||||
Reconstruction Method | xmipp | ||||
Values of lambda for ART | xmipp | ||||
Initial max frequency used by reconstruct fourier | xmipp | ||||
Compute resolution? | xmipp | ||||
Low Pass Filter the reference? | xmipp | ||||
Do not use estimated resolution for low-pass filtering? | xmipp | ||||
Constant to add to the estimated resolution | xmipp | ||||
ang | angular step for projections in degrees | EMAN | |||
angular increments | list of angular increments for projection mapping | spider | |||
MRA - angular increment of forward projections | imagic | ||||
maxshift | max translation during image alignment in pixels | eman | |||
xyshift | particles only allowed to shift this far from center | spider | |||
MRA - max radial shift compared to original images | imagic | ||||
MRA - max radial shift during this iteration | imagic | ||||
hard | hard limit for make3d program | eman | |||
clskeep | =[std dev multipier] how many raw particles discarded for each class average | eman | |||
clsiter | iterative alignmnet to each other | eman | |||
filt3d | applies gaussian low pass filter in pixels [rad] | eman | |||
xfiles | =[mas in kD] | eman | |||
Approximate mass in Kd | imagic | ||||
MSA - percentage of images to ignore when calculating eiganimages | imagic | ||||
shrink | scale down by a factor of [n] before classification | eman | |||
euler2 | =[oversample factor] | eman | |||
median | use median value instead of average for each pixel | eman | |||
phscls | use signal to noise ratio weighted phase residual | eman | |||
refine | do subpixel alignment | eman | |||
tree | decimate reference populatiuon | eman | |||
coran | use coran algorithm | eman | |||
eotest | use even odd test | eman | |||
amplitude contrast (WGH) | frealign | ||||
Standard deviation filtering | fealign | ||||
keep | determines which particles are kept for back-projection, -1 is one standard deviation worse than mean | spider | |||
MSA - fraction of final class averages to keep | imagic | ||||
Phase B-factor weighting constant (PBC) | frealign | ||||
B-factor offset (BOFF) | frealign | ||||
Number of randomized search trials (ITMAX) | frealign | ||||
Number of potential matches to refine (IPMAX) | frealign | ||||
Target phase residual (TARGET) | frealign | ||||
Worst phase residual for inclusion (THRESH) | frealign | ||||
Resolution limit of reconstruction (RREC) (in Ångstroms; default Nyquist) | frealign | ||||
lp | filtering | low pass filter in angstroms | spider, imagic | ||
hp | filtering | high pass filter in angstroms | spider, imagic | ||
Lower resolution limit or high-pass filter (RMAX1) (in Ångstroms) | frealign | ||||
Higher resolution limit or low-pass filter (RMAX2) (in Ångstroms; default 2*Nyquist) | frealign | ||||
B-factor correction (RBFACT) (0 = off) | frealign | ||||
Only use CTFFIND values | frealign | ||||
Last particle to use | frealign | ||||
MSA - num class averges to produce from raw images | imagic | ||||
MSA - num factors to use for classification | imagic | ||||
MSA - percentage of worst class members to ignore after classification | imagic | ||||
threed reconstruction | object size, low-pass filter 3d volume | imagic | |||
Center stack prior to alignment | imagic | ||||
Mirror references for alignment | imagic |
Updated by Amber Herold over 13 years ago · 11 revisions