Refinement Web User Interface documentation¶

Class Diagram¶

The following class diagram shows the BasicForm class with it's extended classes as well as the FormParameter class and it's extended classes.
It also shows associations among the classes.
Notice that the specific refine parameter classes use polymorphism to override the validate() function. This allows the extended classes to provide more complex validations than a typical form requires.
Other forms, such as RunParameters and stack prep, just use the base FormParameters class that their parent, BasicForm, uses.

Sequence Diagram¶

The following sequence diagram shows how the Form and Parameter classes work together to display a form, validate the user input, and create a command string.

Steps to add a new refinement method to the pipeline¶

1. Create a new class which extends BasicRefineForm
2. Create a new class which extends RefineFormParameters. This is optional, but recommended.
3. Decide what information you need to collect from the user and add a form parameter for each item.
   1. example: adding parameters to a new parameter class
      1. note that the parent constuctor is called first, passing any default values along. The RefineFormParameters base class defines parameters that are common to most refinement methods. You only need to add parameters that are not already defined in the base class.
      2. use the addParam(name, value, label) method to add parameters specific to your refine method to your form.
      3. if you find that the base class includes a parameter that your method does not need, you can remove the parameter from the form with the hideParam(name) method.
         

         class XmippParams extends RefineFormParameters
         {
             function __construct( $id='', $label='', $outerMaskRadius='', $innerMaskRadius='', $outerAlignRadius='', 
                                     $innerAlignRadius='', $symmetry='', $numIters='', $angSampRate='', $percentDiscard='',  
                                     $filterEstimated='', $filterResolution='', $filterComputed='', $filterConstant='',
                                     $mask='', $maxAngularChange='', $maxChangeOffset='', $search5DShift='', $search5DStep='',
                                     $reconMethod='', $ARTLambda='', $doComputeResolution='', $fourierMaxFrequencyOfInterest='' ) 
             {
                 parent::__construct($id, $label, $outerMaskRadius, $innerMaskRadius, $outerAlignRadius, 
                                     $innerAlignRadius, $symmetry, $numIters, $angSampRate, $percentDiscard,  
                                     $filterEstimated, $filterResolution, $filterComputed, $filterConstant );
         
                 $this->addParam( "mask", $mask, "Mask filename" );
                 $this->addParam( "maxAngularChange", $maxAngularChange, "Max. Angular change " );        
                 $this->addParam( "maxChangeOffset", $maxChangeOffset, "Maximum change offset " );
                 $this->addParam( "search5DShift", $search5DShift, "Search range for 5D translational search " );
                 $this->addParam( "search5DStep", $search5DStep, "Step size for 5D translational search " );
                 $this->addParam( "reconMethod", $reconMethod, "Reconstruction method " );
                 $this->addParam( "ARTLambda", $ARTLambda, "Values of lambda for ART " );
                 $this->addParam( "doComputeResolution", $doComputeResolution, "Compute resolution? " );
                 $this->addParam( "fourierMaxFrequencyOfInterest", $fourierMaxFrequencyOfInterest, "Initial maximum frequency used by reconstruct fourier " );
         
                 // disable any general params that do not apply to this method
                 $this->hideParam("innerMaskRadius");        
             }
         
             function validate() 
             {
                 $msg = parent::validate();
         
                 if ( !empty($this->params["mask"]["value"]) && !empty($this->params["outerMaskRadius"]["value"]) )
                     $msg .= "<b>Error:</b> You may not define both the outer mask raduis and a mask file.";
         
                 return $msg;
             }
         }
         

   2. example: adding parameters to the form constructor method
4. define any restrictions that should be applied to the parameters.
5. Override the advancedParamForm() function to add a user input field for each one.
6. Override the buildCommand() function. There is a default implementation available which adds all form parameters as --<name>=<value>.
7. create your new form type in selectPreparedRecon.php
   

   // based on the type of refinement the user has selected,
   // create the proper form type here. If a new type is added to
   // Appion, it's form class should be included in this file
   // and it should be added to this function. No other modifications
   // to this file should be necessary.
   function createSelectedRefineForm( $method, $stacks='', $models='' )
   {
       switch ( $method ) {
           case emanrecon:
               $selectedRefineForm = new EmanRefineForm( $method, $stacks, $models );
               break;
           case frealignrecon:
               $selectedRefineForm = new FrealignRefineForm( $method, $stacks, $models );
               break;
           case xmipprecon:
               $selectedRefineForm = new XmippRefineForm( $method, $stacks, $models );
               break;
           case xmippml3drecon:
               $selectedRefineForm = new XmippML3DRefineForm( $method, $stacks, $models );
               break;
           default:
               Throw new Exception("Error: Not Implemented - There is no RefineForm class avaialable for method: $method"); 
       }        
   
       return $selectedRefineForm;
   }
   

8. Add an entry to selectRefinementType.php for the new method.