Project

General

Profile

Actions

Upload image grouping » History » Revision 7

« Previous | Revision 7/8 (diff) | Next »
Anchi Cheng, 11/12/2015 03:14 PM


Defocal pair (Webform parameter entry only)

The user will need to make sure the files are organized alphabetically sorted by the group first
For example, image1.mrc=location1/defocus1, image2.mrc=location1/defocus2, image3=location2/defocus1, image4=location2/defocus2 etc.

RCT tilt pair or defocal pair (Both methods available)

Image pair upload for rct

In order to associate the images as tilt pairs, the files need to b uploaded in a specific way as follows.

Name the files so that the two tilts are next to each other after a filename alphabetical sort.

For example,

image1.mrc series 1 tilt 1
image2.mrc series 1 tilt 2
image3.mrc series 2 tilt 1
image4.mrc series 2 tilt 2

Follow Upload_Images_to_a_new_Project_Session to open the interface for image upload

but use the following instruction for the specific parameters involved.

Enter tilts in degrees

Successful upload should be viewable as pairs in RCT_viewer

Tomography tilt series (Parameter File method only)

The file entry should be ordered by the tilt series. It is possible to upload a bi-directional (0 to positive tilts and then 0 to negative tilts, for example) tilt series.
Number of images in the tilt group defines the tilt series.

Updated by Anchi Cheng about 9 years ago · 7 revisions