Project

General

Profile

Adding DE-12 to Leginon » History » Revision 9

Revision 8 (Anchi Cheng, 01/09/2014 09:04 PM) → Revision 9/16 (Anchi Cheng, 01/09/2014 09:20 PM)

h1. Installation Guide for DE-12 or DE-20 

 h2. Adding DE-12 and DE Suvey camera to existing Leginon system 

 Follow instruction on [[Installation_on_the_microscope_computer]].    Set both camera on the same z-plane in instruments.cfg 

 [[Instrument.cfg for DE-12]] 
 h2. Testing 

 * DE-12 is on a computer separated from the microscope 

 microscope.    Please read [[Using_Leginon_on_a_system_where_the_microscope_and_camera_are_controlled_by_different_computers]] first. 

 h2. Extra Package * Here are the relevant tests: 
 ** [[Test Network Connection Between Remote and Installation 

 None. 

 h2. instruments.cfg 

 {{include(Instrument.cfg for DE-12)}} Microscope Computers|Test Network Connection Between Remote and DECamera Computers]] 
 height ** [[Run Leginon Client on the Microscope Computer|Run Leginon Client on Both Microscope Computer and width should be set according to the model. DECamera computer]] 
 ** [[Start Leginon at your main working station remotely]] 

 h2. Setup 

 * Create the folder Proceed to store the dose fractionation raw frames.    Default location is D:\\frames. 
 * Setup [[DDD_raw_frame_file_transfer|raw frame file transfer]] from a network data server. 

 h2. Testing 

 h2. Testing test and run it like any other camera with pyscope 

 [[DE-12 Installation Pyscope Test]] 

 h2. Programs to open before Leginon Client: Server [[Leginon "Manual_Application"]]