Electron Microscopy Group

09/06/2019

06:54 PM Leginon Leginon: RE: Setting up beam-image shift targeting

Hi Anchi,
I followed your new instruction for image-shift coma correction on K3 (no GIF) using manual way, but enc... Aguang Dai

08/15/2019

02:35 PM Leginon Leginon: RE: Weird strip feature during Leginon K3 dark/bright reference images calibration

Hi Anchi,
You're right, it's because of the width/height swapping.
See attachment for the difference.
I swapped ... Aguang Dai

12:16 PM Leginon Leginon: RE: Weird strip feature during Leginon K3 dark/bright reference images calibration

Hi Anchi,
The empty area and cross-grating area I mentioned, actually are both using cross-grating grid; one is in... Aguang Dai

08/14/2019

06:51 PM Leginon Leginon: RE: Weird strip feature during Leginon K3 dark/bright reference images calibration

Hi Anchi,
Thanks.
Before I used "dark subtracted", and I changed to "gain normalized" this time in dmsem.cfg
On ... Aguang Dai

03:16 PM Leginon Leginon: Weird strip feature during Leginon K3 dark/bright reference images calibration

Hi all,
I'm doing the calibration for Leginon (beta version) with K3 camera (No GIF).
During the dark/bright refe... Aguang Dai

01/16/2019

02:24 PM Leginon Leginon: RE: At what point is information written to the myami database?

Patrick Goetz wrote:
> So the solid state drive on the K2 had *no* images on it when this problem occurred, which is... Aguang Dai

11/07/2018

01:47 PM Leginon Leginon: RE: K3 Camera?

Hi Anchi,
Any news new version Leginon with K3?
I heard some group have their K3 run with Leginon.
Thanks.
Be... Aguang Dai

06/25/2018

02:06 PM Leginon Leginon: RE: "Process target failed: List index out of range" error during tomography

I'm really sorry for this stupid mistake.
I checked several times and didn't find out.
Thanks a lot.
Best,
Guang Aguang Dai

06/19/2018

06:36 PM Leginon Leginon: "Process target failed: List index out of range" error during tomography

Hi there,
Starting from yesterday, I always encountered this error during tilt series collection (see attachment a... Aguang Dai

06/04/2018

11:55 AM Leginon Leginon: Webpage no displaying for goniometer calibration and tomo shift graph

Hi there,
Recently I was doing some calibration and setup for Tomo.
For modeled stage position, I can't see the r... Aguang Dai