Bug #1225
closedViper to EMAN conversion option crashes upload model job
0%
Manually run two EMAN commands:
proc3d viperfile.mrc tmpfile.mrc icos5fTo2f
then
proc3d tmpfile.mrc emanfile.mrc rot=0,0,90
These should be accessible as a tool tip or link next to the option box. This information was difficult to find.
Description
Hi Jeff,
The Viper to Eman conversion error must be a bug. I had never tried it before today, and I got the same error as you. This needs to be looked into, so you can submit a redmine issue for it if you want.
Lauren
On Mar 4, 2011, at 3:27 PM, Jeff Speir wrote:
Hi Lauren,
I thought of this and I've tried twice (once yesterday, once today) to upload a model in viper orientation and rotate it to EMAN orientation using the checkbox in the Upload Model page. Unfortunately it has crashed both times. Please see:
ami/data17/appion/11jan12a/models/accepted/file_11mar02p48
/ami/data17/appion/11jan12a/models/accepted/file_11mar03k45
Looks like the same error both times, and may be related to using the viper to eman option (?). The model I uploaded previously is identical except already rotated - I used the same parameters to upload but had not checked the rotation option.