Leginon

The camera modes are configured as separate cameras as follows.    

* Super Resolution should be double the size of Linear and Counting.  

* zplane will be relative to any other cameras in your system.  Anything below K2 should have a lower zplane.

* to make the images acquired from the camera to have the [[Leginon Image Orientation|standard Leginon orientation]], the camera configuration in Digital Micrograph will need a rotation and flip (270 degree rotation and a flip around the vertical axis on our camera) on typical FEI F20 but maybe not so post-GIF or on Krios.  Therefore, *the height is longer than width* in the configuration below

<pre>[Gatan K2 Linear]

class: dmsem.GatanK2Linear

zplane: 50

width: 3710

height: 3838

[Gatan K2 Counting]

class: dmsem.GatanK2Counting

zplane: 50

width: 3710

height: 3838

[Gatan K2 Super]

class: dmsem.GatanK2Super

zplane: 50

width: 7420

height: 7676</pre>

If you have an Orius camera with K2, set its zplane below K2 like this:

<pre>

[camera2]

class: dmsem.GatanOrius

zplane: 49

width: 2048

height: 2048

</pre>