Instrumentscfg for 22 » History » Revision 3
Revision 2 (Anchi Cheng, 06/05/2012 01:47 PM) → Revision 3/17 (Anchi Cheng, 06/05/2012 01:47 PM)
*cs is the coefficient of spherical aberration in meters*. Find out from TEM manufacture the proper value for your tem. *zplane is a number that gives the order of camera*. If a camera with low zplane value is going to acquire an image, Leginon will attempt to retract all camera at higher zplane values. * One computer for both tem and digital camera: <pre> [tem] class: tecnai.Tecnai cs: 2.0e-3 [camera] class: gatan.Gatan zplane: 50 </pre> * Sperate computers for the two instruments: configure only the instrument reside on the particular computer ** On the computer that controls the tem: <pre> [tem] class: tecnai.Tecnai cs: 2.0e-3 </pre> ** On the computer that controls the digital camera: <pre> [camera] class: gatan.Gatan zplane: 50 </pre> * Two camera controlled by the same computer and server such as in the case of DE12 and DE Survey camera that retract/insert at the same time. ** On the computer that controls the digital camera: <pre> [camera1] class: de12.DE12 zplane: 50 [camera2] [camera1] class: de12.DESurvey zplane: 50 </pre> * Two camera is controlled by the same computer and server but one is retractable and one is non-retractable and at lower position. ** On the computer that controls the digital camera: <pre> [camera1] class: de12.DE12 zplane: 50 [camera2] class: tietz.TietzPXL zplane: 5 </pre>