| exposure targeting problem |
Thorsten Mielke |
02/07/2011 07:22 AM |
2 |
Added by Anchi Cheng almost 14 years ago
RE: exposure targeting problem
|
| Bad exposure shutter or normalizaton |
Bob Grassucci |
02/02/2011 01:56 PM |
3 |
Added by Bob Grassucci almost 14 years ago
RE: Bad exposure shutter or normalizaton
|
| MSI-T exposure targeting submit not there |
Bob Grassucci |
02/03/2011 04:08 PM |
3 |
Added by Bob Grassucci almost 14 years ago
RE: MSI-T exposure targeting submit not there
|
| Dose limitation in MSI-T |
Jason van Rooyen |
02/01/2011 07:46 AM |
4 |
Added by Jason van Rooyen almost 14 years ago
RE: Dose limitation in MSI-T
|
| align presets window freeze at the end |
Jian Shi |
01/27/2011 11:08 PM |
2 |
Added by Anchi Cheng almost 14 years ago
RE: align presets window freeze at the end
|
| MSI-T exposure targeting/acquisition |
Cheri Hampton |
01/18/2011 04:16 PM |
6 |
Added by Cheri Hampton almost 14 years ago
RE: MSI-T exposure targeting/acquisition
|
| Standard deviation of the gain corrected image is not reduced from that of the raw image |
Anchi Cheng |
12/17/2010 02:08 PM |
9 |
Added by Jim Pulokas almost 14 years ago
RE: Standard deviation of the gain corrected image is not...
|
| How to remove data |
Anchi Cheng |
12/17/2010 02:05 PM |
4 |
Added by Anchi Cheng almost 14 years ago
RE: How to remove data
|
| Communication problem when setting beam intensity |
Matthias Brunner |
11/19/2010 05:52 AM |
10 |
Added by Matthias Brunner almost 14 years ago
RE: Communication problem when setting beam intensity
|
| Returning Tecnai to z=x of parent image xyz... |
Matthias Brunner |
11/23/2010 01:53 AM |
2 |
Added by Matthias Brunner almost 14 years ago
RE: Returning Tecnai to z=x of parent image xyz...
|
| MSI-Edge hole targeting questions |
Anchi Cheng |
11/23/2010 03:37 PM |
1 |
Added by Anchi Cheng almost 14 years ago
RE: MSI-Edge hole targeting questions
|
| Image/Beam Alignment in Tecnai UI |
Matthias Brunner |
10/27/2010 06:12 AM |
1 |
Added by Anchi Cheng about 14 years ago
RE: Image/Beam Alignment in Tecnai UI
|
| Testing new target finding algorithm |
Anchi Cheng |
09/16/2010 09:31 AM |
0 |
|
| Goniomodeling-which model? |
Cheri Hampton |
08/13/2010 09:52 AM |
3 |
Added by Cheri Hampton over 14 years ago
RE: Goniomodeling-which model?
|
| Camera sensitivity calibration with known dose rate |
Anchi Cheng |
03/19/2010 11:55 AM |
5 |
Added by Jim Pulokas over 14 years ago
RE: Camera sensitivity calibration with known dose rate
|
| Image directory mapping for a network drive and an independent web host. |
Jason van Rooyen |
07/16/2010 03:36 AM |
4 |
Added by Jason van Rooyen over 14 years ago
RE: Image directory mapping for a network drive and an in...
|
| Leginon stops after taking 1 exposure |
Anonymous |
07/09/2010 01:49 PM |
7 |
Added by Anonymous over 14 years ago
Re: Leginon stops after taking 1 exposure
|
| DataManager size reached, removing data as needed |
Anonymous |
06/07/2010 10:48 AM |
2 |
Added by Anonymous over 14 years ago
Re: DataManager size reached, removing data as needed
|
| RCT problems |
Anonymous |
06/28/2010 02:16 AM |
1 |
Added by Anchi Cheng over 14 years ago
Re: RCT problems
|
| image coordinate coordinate out of range error |
Anchi Cheng |
06/07/2010 04:24 PM |
3 |
Added by Anchi Cheng over 14 years ago
Re: image coordinate coordinate out of range error
|
| Leginon Image Coordinate System |
Anchi Cheng |
05/10/2010 09:25 AM |
1 |
Added by Anchi Cheng over 14 years ago
Re: Leginon Image Coordinate System
|
| Beam re-centering on Polara |
Anonymous |
04/13/2010 06:30 AM |
0 |
Added by Anonymous over 14 years ago
Beam re-centering on Polara
|
| Using digital micrograph reference images |
Anonymous |
01/14/2010 03:27 AM |
6 |
Added by Anchi Cheng over 14 years ago
Re: Using digital micrograph reference images
|
| Tietz versus Olympus camera |
Anonymous |
03/23/2010 08:32 AM |
1 |
Added by Jim Pulokas over 14 years ago
Re: Tietz versus Olympus camera
|
| stage accuracy |
Anonymous |
03/23/2010 09:31 AM |
1 |
Added by Anchi Cheng over 14 years ago
Re: stage accuracy
|